background image

Page 6 of 12 

 

and perform its intended function. Replace damaged or worn parts immediately. Never operate the 
product with a damaged part. 

 

Do not use a product with a malfunctioning switch. Any power tool that cannot be controlled with 
the power switch is dangerous and must be repaired by an authorized service representative 
before using. 

 

Disconnect the power/air supply from the product and place the switch in the locked or off position 
before making any adjustments, changing accessories, or storing the tool. Such preventive safety 
measures reduce the risk of starting the tool accidentally. 

 

Store the product when it is not in use. Store it in a dry, secure place out of the reach of children. 
Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your product. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool. Never use an accessory that has a lower operating speed or operating pressure than 
the tool itself. 

 

Keep guards in place and in working order. Never operate the product without the guards in place. 

 

Do not leave the tool running unattended. 

Specific Operation Warnings 

WARNING

 

 

To prevent serious injury or property damage, read and understand owner’s manual before 
operating. 

 

Always wear the proper personal protective gear including ANSI Z87.1 compliant safety goggles 
and heat-resistant rubber gloves when using this product. 

 

Use only on a dry, clean, level surface capable of supporting the weight of the vehicle. 

 

Engine exhaust contains carbon monoxide; an odorless, invisible gas that can cause injury or 
death. Do not run the vehicle’s engine while using this product. 

 

Never work under a vehicle without the proper support devices. An incorrectly supported vehicle 
can tilt or fall and cause injury or death. 

 

Do not exceed the maximum rated pressure. 

 

Do not use to pump water or any other liquid other than oil. 

 

Hot oil can cause severe burns. Allow the engine oil to cool down completely before pumping the 
oil. 

 

Fire hazard. Flame or heat sources may ignite oil resulting in fire, injury or death. Never use or 
store this product near open flames or other heat sources. 

 

Remove this product and clear the work area before lowering the vehicle. 

 

Used engine oil is toxic and should be properly disposed of or recycled. 

 

Do not use with corrosive or flammable fluids. 

 

Not for use by or around children. 

Содержание 57141













Отзывы: