3.10
[en] 02/2014
Installation and operating manual - NK 31
ROTORCOMP VERDICHTER
3.10 Intake air filter
Figure 3-8
3.10.1 Micro air filter element
The RC intake air filter is mounted directly over
the intake valve.
The micro air filter
1
with a fineness of 10 μm is
used for the filtering of intake air.
The constant degree of separation of almost
100 % on all loading levels, the resistance to
heat, cold, water, oil and fuel and a large filter
area permit a long service life. As a result, the
micro air filter element is the ideal fine filter for
the filtering of intake air of compressor system.
1
3.10.2 Intake filter monitoring
• Maintenance indicator, optical (option)
• Maintenance indicator, electric (option)
The micro air filter elements are recommended
as a
1-stage filter
with a low filter resistance for
standard applications
.
Attention
Special applications, e.g. system installation in
a heavily soiled environment, mobile systems,
etc., require 2-stage filters with a somewhat
higher filter resistance, however a better degree
of separation for the protection of the compressor
system.
Filter Type/Order No.: on special request.
