1.8 Fabricator
All installation work must be carried out by experts. Experts are persons who
have sufficient knowledge in the area of cable junctions for doors due to their
training and experience.
Only an electrician may connect the frame component (mat. no. 817028) to
the 230 V power supply.
Experts are persons who are also sufficiently familiar with the relevant
statutory occupational health and safety regulations, accident prevention
regulations, directives and generally recognised rules of good engineering
practice (e.g. VDE regulations, BGR guideline, DIN standards) to be able to
evaluate whether cable junctions for doors are safe to operate.
Adherence to the relevant local installation regulations and provisions is
required for installation.
1.9 Target groups’ obligation to give instructions
INFO
Each target group must fulfil their obligation to give instructions
in full.
Unless specified otherwise in the text below, documents and
information can be passed on as a printed document, on a data
storage device or via the Internet.
Responsibility of hardware dealers
Hardware dealers must pass the following documents on to the door
manufacturer:
■
Catalogue
■
Installation, maintenance and operation instructions
Responsibility of the door manufacturer
The door manufacturer must pass the following document on to building
element dealers or the builder, even if a subcontractor (installation company)
is involved:
■
Installation, maintenance and operation instructions
They must ensure that the end users are provided with the documents and
information intended for them in printed format.
Responsibility of building element dealers / the installation company
Building element dealers must pass the following document on to the
builder, even if a subcontractor (installation company) is involved:
■
Maintenance and operation instructions
Responsibility of the builder
The builder must hand over the following document to the end user:
■
Maintenance and operation instructions
General information
Fabricator
Subject to change.
Roto Safe - Cable junctions
IMO_502_EN_v2
·
05 / 2020
· 9
