Rothenberger 055795Z, Инструкция по эксплуатации

Страница: 15 / 100

ENGLISH 13
Sound power level dB (A) L
WA
¦ K
WA
...................... 100 ¦ 3 ................... 100 ¦ 3
Heating element:
Power supply ........................................................ 230 V a.c.......... 110-120 V a.c.
50/60 Hz .......... 50/60 Hz
1500 W ............ 1500 W
Heating plate diameter (mm) ................................. 300 .................. 300
Weight (kg) ........................................................... 5,24 ......................
5,24
Weights:
Complete machine (kg) ......................................... 36,1 ...................... 36,1
P250A with transport box and accessories (kg) .... 131,0..................... 131,0
Dimensions: (LxWxH):
P250A in transport box (mm) ................................ 800 x 520 x 700
onto transport box (work position) (mm) ................ 800 x 750 x 1300
The noise level during operation can exceed 85 dB (A). Wear hearing protection!
3 Function of the Unit
3.1 Description
ROWELD P 250 A is a compact, easy to handle and easy to transport heating plate butt fusion
plastic pipe welding machine. Welding joints on pipes made of PE-, PVDF- and PP with outer
Diameter of 40 to 250 mm can be produced with the machine safely.
The machine basically consists of:
Monoblock machine housing with fixed and movable table, electric trimmer, electronically regu-
lated heating element, basic clamping set Ø160mm and Ø250mm, pipe supports, working and
transport frame, adaptor clamping inserts.
3.2 Operating instructions
In accordance with national or EU ordinances and guidelines, e. g. DVS 2212, Section I,
only duly qualified and authorized personnel are allowed to operate the ROWELD welding
machines!
Only trained and authorized welders are allowed to operate the machine!
3.2.1 Putting into operation
Please read through the operating instructions and safety instructions attentively before
you put the butt fusion welding machine into operation!
Do not use the heating element in explosive environments or bring it into contact with
easily flammable materials!

Open the 4 locks and lift the upper part of the transport box and turn it around. Put the ma-
chine on a level, solid surface.

Put the machine, which is mounted on the base of transport box onto the opening of the up-
per part of the transport box.

Turn the handle bar into the pressure lever joint (frontside of the machine) and loosen the
knurled handle for fixing the table.

Pull the trimmer lock to the front and swivel the trimmer to the back.

Swivel heating element to the back and turn the handle bar into heating plate holder.

Connect power plug of trimmer unit and heating element to the power supply stated on the
type plate.
The red “Stand by“ diode on the heating element lights up, which means: voltage is being ap-
plied. Switch on the heating element on the hand grip using the large press-button (lights up
green) and set the desired temperature using the “+“ or “-“ button (160°C to 285°C / 320°F to
545°F).