Rotex RKHWMX300C Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 72

Rotex RKHWMX300C Скачать руководство пользователя страница 5

2

x

Safety

FA ROTEX HPSU monobloc compact • 09/2017

5

2

Safety

2.1 Warnings and symbols

2.1.1 Meaning of the warnings

Warnings in this manual are classified according
into their severity and probability of occurrence.

Special warning signs

Some types of danger are represented by
special symbols:

2.1.2 Validity

Some information in this manual has limited va-
lidity. The validity is highlighted by a symbol.

2.1.3 Order number

References to order numbers can be recognised
from the goods symbol

.

2.1.4 Handling instructions

Ɣ

Handling instructions are shown as a list.
Actions for which the sequential order must be
maintained are numbered.

2.2 Avoiding danger

The ROTEX HPSU monobloc compact is built
according to the state-of-the-art and the recog-
nised technical rules. However, improper use
may result in serious physical injuries or death,
as well as property damage.

To avoid hazards, only install and operate the
ROTEX HPSU monobloc compact:

– as stipulated and in perfect condition,
– with an awareness of safety and the hazards

involved.

This assumes knowledge and use of the con-
tents of this manual, of the relevant accident pre-
vention regulations as well as the recognised
safety-related and occupational health rules.

DANGER!

Draws attention to imminent danger.

Disregarding this warning can lead to serious
injury or death.

WARNING!

Indicates a potentially dangerous situation.

Disregarding this warning may result in serious
physical injury or death.

CAUTION!

Indicates a situation which may cause possible
damage.

Disregarding this warning may cause damage
to property and the environment.

This symbol identifies user tips and par-
ticularly useful information, but not
warnings or hazards.

Electric current

Risk of burning or scalding

Risk of environmental damage

Danger of local freezing up

Health impairing or irritant materials

Prescribed temperature for continuous use

Danger of explosion

Heat pump outdoor unit

Heat pump interior unit HPSU monobloc
compact

HP convector

Observe specified tightening torque (see
chap. 10.3 "Tightening torque")

Only applicable to the unpressurised solar
system (DrainBack).

Only applicable for the pressurised solar
system.

Î

Results of actions are identified with an
arrow.
Entry into a setting procedure

Exit from a setting procedure

«
...
3
4
5
6
7
...
»

Содержание RKHWMX300C









































































Отзывы:

Нет отзывов