Rotex E-Solar Unit ESU 509, Инструкция по установке и обслуживанию

Страница: 11 / 72

3 Set-up and installation
11
FA ROTEX ESU - 07/2008
3 Set-up and installation
Incorrect set-up and installation would make the manufacturer's guarantee void. If you have questions, please contact our
Technical Customer Service.
3.1 Transport and delivery
The ROTEX ESU is delivered on a pallet. All industrial trucks, such as lifting trucks and forklift trucks, are suitable for
transporting it.
Scope of delivery
– ROTEX ESU (pre-assembled and ready to plug in), consisting of a solar storage tank, electric heat generator, integrated
circulation pump, 3-way diverter valve, automatic vent valve, KFE cock, internal temperature sensors (flow, return flow,
storage tank), external temperature sensor, fill level probe, safety group and ball cocks.
– The document folder, containing installation and maintenance instructions, instruction manual, installation and instruction
form.
3.2 Installing the ROTEX E-SolarUnit
3.2.1 Selecting the installation site
The installation site for the ROTEX ESU must meet the minimum requirements below.
Installation area
– The surface must be solid, level, horizontal and have sufficient load capacity. Install a pedestal if necessary.
– Observe the installation dimensions (see Chapter 3.3).
3.2.2 Installing the unit
Requirement:
– The installation site complies with applicable country-specific regulations and meets the minimum requirements described in
Chapter 3.2.1.
DANGER!
Danger of death due to improper installation
Electronic units, which are not set up or installed properly can endanger an individual's life or health and can
also impair the function they are designed to perform.
• The ROTEX E-SolarUnit must be set up and installed by authorised and trained heating experts.
WARNING!
Danger of injury from toppling over.
Risk of toppling over: When empty, the ROTEX ESU is top-heavy and topples over easily. This can result in
injury to individuals or damage to the unit.
• Transport the ROTEX ESU carefully, using the handles provided on it.
WARNING!
Danger of injury from toppling over.
Risk of toppling over: When empty, the ROTEX ESU is top-heavy and topples over easily. This can result in
injury to individuals or damage to the unit.
• Transport the ROTEX ESU carefully, using the handles provided on it.