Rotex E-Solar Unit ESU 509, Инструкция по установке и обслуживанию

Страница: 33 / 72

6 ROTEX control system ALPHA
+
23R
33
FA ROTEX ESU - 07/2008
6.2.2 "Default settings" rotary switch
6.2.3 Operator keys
The operator keys can be used to modify and save values.
6.2.4 Special functions
TARGET HOT WATER
TEMPERATURE
Display and modify target hot water temperature.
NORMAL OPERATING
MODE Default setting. Display the current flow temperature (to display the current external
and hot water temperature, see Chapter 6.5.2, page 35).
TEMPERATURE
ADJUSTMENT
Display and modify correction value (parallel shift of the heating curve).
STATUS PLANT Read out data on equipment status.
WEEKDAY Display and change weekday.
CLOCK TIME Display and change time.
PARAMETER Select and change parameters.
PLUS
Changing values. The keys are used for navigation within the "Parameter",
"Information" and "Automatic I" menu items.
MINUS
OK/RESET OK function: Press key briefly
– Confirms or saves selected settings.
– Enters the submenu.
RESET function: Press key and hold it down for longer than 3 s.
– Resets settings to existing values.
– Returns to higher-level selection point within the function menu.
– Operator acknowledging fault signals and returns to default display.
Manual warm water boost charge (see Chapter 6.6.9, page 49)
manual operation (see Chapter 6.5.7, page 40)
Programming switch switching time programme "automatic I" (see Chapter 6.5.6,
page 36)
Setting heating curve (see Chapter 6.6.5, page 46)
i
1
7
OK
+
5 sec
+ +
OK
+
OK
>5sec