manualshive.com logo in svg

Rotex Controller Series, Продуктовая документация

Поделиться
Скачать
Rotex Controller Series Скачать руководство пользователя страница 138

EbV

Product documentation THETA NORM/UNIT

8-54

8.8

Heat forced dissipation valve

Function:

This function allows preventing the degassing of the medium at high solar panel 
temperatures in solar power systems. Such degassing can occur when the solar heat 
tank is full (maximum temperature exceeded) and, consequently, forced dissipation 
into the heat tank is impossible. In this case, the solar pump is switched off and the 
solar panel temperature rises.

Description:

The function of the solar forced heat dissipation valve involves a forced switch-off of 
the SOP when the final switch-off temperature is exceeded.

This function is independent of the assignment of a forced-dissipation valve to a 
variable output. The setting OFF will be added.

The final switch-off setting is independent of the preset solar panel maximum 
temperature and can be lower than the latter. In this way there are independent 
forced switch-on and forced switch-off functions for the SOP.

The solar forced heat dissipation output is energized under the following conditions:

• Function enabled for solar tank temperatures in excess of the maximum 

temperature.

• When the solar panel temperature rises above the set solar panel maximum 

temperature the output is switched on while the solar loading pump continues 
running.

• When the solar panel temperature rises above the set final switch-off temperature 

the SZV output and the solar loading pump are switched off.

Operation:

This function can be selected only if an SOP has been set.

CAUTION

When this function is active, the solar loading pump continues running even when 
the solar panel temperature exceeds the set solar panel maximum temperature.

Содержание Controller Series

































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды