Gebrauchsanweisung ○
Mode d
’
emploi
○
Istruzioni per l
’
uso
○
Instructions for use
58
Knob
Fig. 4
Descaling the steam generator
o
When the boiler requires descaling, the descaling indicator light will illuminate and
the scale that forms inside the steam generator must be manually rinsed out and re-
moved.
o
Turn the appliance upside down, place it on a level surface and unscrew the knob
(Fig. 4).
o
Empty the boiler over a sink.
o
Using a jug, fill the boiler (in the base unit) with ¼ litre of clean
water and shake the base gently to clean it.
o
Empty again and make sure no water remains in the boiler.
o
After drainage, tighten up the knob and set the unit base again
on a working surface.
NOTE: If the water is very dirty, repeat the operation until it comes out clean. Optionally
mix a little white vinegar and warm water in a jug or use a diluted descaling solution to
descale the steam generator.
WARNING: To avoid a risk of scald, make sure the steam generator has cooled down
completely before unscrewing the knob.
STORAGE
o
Turn off and unplug the steam generator iron. Allow to cool down.
o
Lock the iron on its base unit and store the power cord/supply hose:
Fold the steam supply hose in two and wind it
along the cord storage groove, then fix it at the
cord storage groove;
Fold the power cord in two and wind it along the
cord storage groove, then fix it at the cord storage
groove (Fig.5).
Store the appliance in a cool and
dry place, out of the reach of children and prefer-
ably in its original box, to keep it dust-free.
