Rotax 912 iS Sport, Руководство по обслуживанию

Страница: 51 / 158

d
050
27
.f
m
MAINTENANCE MANUAL
BRP-Powertrain
Effectivity: 912 i Series
Edition 1/Rev. 0
05-20-00
page 3
January 01/2012
1) Scheduled maintenance checks
Definition
This section lists the periodic inspections which must be carried out after
a specified period of operation.
Intervals
Periodic inspections are those which must be performed at 25, 100, 200,
600 hr. intervals in accordance with chapt. 05-20-00. section:
5.1).
This means for example that every 100 hr. of operation a 100 hr. check
must be carried out. Every 200 hr. of operation a 100 hr. and the addi-
tional checks for 200 hr. must be carried out.
100 hr.
check
- In order to demonstrate continued airworthiness, an engine must be
inspected after every 100 hours of operation or 12 months.
- For the intervals between maintenance work, a tolerance of ±10 hr. is
permissible, but these tolerances must not be exceeded. This means
that if a 100 hr. check is actually carried out at 110 hr., the next check
will be due at 200 hr. ±10 hr. and not at 210 hr. ±10 hr.
- If maintenance is performed before the prescribed interval, the next
maintenance check is to be done at the same interval (e.g. if first
100 hr. check is done after 87 hours of operation, the next 100 hr.
check must be carried out after 187 hours of operation).
- If engine has less than 100 hours of operation during one year a
100 hr. check must be carried out. For the annual inspection a toler-
ance of ±2 months is given.
Special hr. check
NOTE: This maintenance schedule contains a column for a 50 hr.
check. This check is recommended by the manufacturer but not
essential, with the exception of oil change when operating with
leaded AVGAS.
Intervals - hours
25 hr 100 hr 200 hr 300 hr 400 hr 500 hr 600 hr 700 hr to
2000
hr
100 hr X X X X X X X X X
200 hr X X X
600 hr X