Rotax 582 UL DCDI 17, Руководство оператора, Страница: 44 / 68

4.1) Re-Start during flight
m WARNING
Non-compliance can result in serious injuries or death!
At unusual engine behaviour conduct checks as per following sec-
tion and according to the relevant section in the Maintenance
Manual.
Engine stop Starting procedure same as on ground, however, on a warm en-
gine without choke.
4.2) Exceeding max. admissible engine speed
Exceeding engine
speed
Reduce the engine speed. Any exceeding of the max. admissi-
ble engine speed has to be entered by the pilot into logbook,
stating duration and extent of over engine speed.
4.3) Temperature
ATTENTION
Reduce engine power setting to the minimum necessary and
carry out precautionary landing.
4.3.1) Exceeding of max. admissible cyl. head temperature
Cylinder head
temperature max. Any exceeding of the max. admissible cylinder head tempera-
ture has to be entered by the pilot into the logbook, stating dura-
tion and extent of over-temperature condition.
4.3.2) Exceeding of max. admissible exhaust gas temperature
Exceeding ex-
haust gas temper-
ature max.
Any exceeding of the max. admissible exhaust gas temperature
must be entered by the pilot into the logbook, stating duration
and extent of excess-temperature condition.
Page 4-2
January 01/2018 BRP-Rotax Effectivity: 582 UL
Edition 3 / Rev. 0