Rotary SPOA3TE 600 Series, Руководство по установке

Страница: 14 / 24

14
A
B
21. Electrical Continued:
A) Wire overhead switch, Fig. 21a and Fig.23.
B) Route overhead cable along hydraulic hose and plug into
harness on back plate of master control panel.
C) Attach plug from harness of master control panel into the
master side lock solenoid.
D) Attach 6 position plug on slave solenoid cable to 6 position
plug on master side wiring harness. Route cable over to
slave solenoid following hydraulic hose and plug into slave
solenoid.
Fig. 22 Detail
A (4) Wire cable from harness connected to back plate to
power unit motor.
B Lowering valve connection from harness to lowering
valve on power unit.
Fig. 22