Rotary Lift ML40, Руководство по эксплуатации и техническому обслуживанию, Страница: 23 / 92

Installation
21
Fig. 5-2 Fastening to the floor
Fitting the hydraulic hoses
X
The control column can be set up to the right or the left of the scissor lift plat-
form. The connection diagrams for the hydraulic hoses are in the appendix of
this operating manual.
X
Place the control column in position.
X
Lay and fit the hydraulic hoses according to the connection diagrams.
The fitting of the hydraulic hoses is completed.
5.4 Electrical installation
WARNING
High electrical voltage
Severe injury or death from electrical shock
• Only trained electricians may work on the electrical system.
CAUTION
Laying of cables
Injury
• Avoid creating stumbling hazards with cables.
• Do not lay control and supply lines around mechanical components.
Secure the machine with a lockable main switch to prevent unauthorised opera-
tion or so that the machine can be safely disconnected from the mains electricity
supply.