Cybox Parts & Hardware
Rev. 10-Jul-14
Pg. 1/4
Cybox
Bluetooth Interface
Installation Instructions
Tools Required
A
B
Disconnect positive cable(s) from battery/batteries.
Tape the end(s) with electrical tape to prevent an
accidental short circuit.
Find a suitable location to mount your Cybox. Ensure
that it is installed in an area that will stay dry and keep
the wires from being snagged or pulled out.
If you have any questions please call : 1-855-962-WAKE(9253)
www.roswellwakeair.com
Phillips Screwdriver
Precision Screwdriver
Electrical Tape
Wire Strippers
C
D
Install a switch or locate an existing one to power on
the Cybox. This 12V+ wire will run from the switch to
the “R” terminal on the Cybox.
Connect the power wires as shown below:
Please Note:
The 12V+ should come from a 3a inline fuse.
Note:
Roswell recommends using marine-quality 18AWG
wire for connecting to your Cybox. Ensure all wires are
secure by giving each one a gentle pull after tightening.
PLEASE NOTE: The Cybox Bluetooth device utilizes a line driver that produces a high voltage output
to provide a top quality listening experience. If you intend on using the Cybox as an auxiliary input,
please be aware that is has an integrated switch that can be used to lower the output voltage of the
Cybox if necessary. See page 4 for more information.
INSTALLING THE CYBOX AS A STANDALONE UNIT
A
x4
3.5MM to
RCA Cable
Cybox Port
B+
B–
R
DR
Function
Constant 12V +
Ground
Switched 12V+
Delayed remote
to amplifier
Wire Colour
Yellow
Black
Red
Blue
