Glass Body Fat Monitor
with Scale
OBM_IB_WF260_EN_SW_v
er1552
INSWF260000000012
8. Body Analysis
1. Turn the monitor on:
• Press
button to turn on the monitor.
2. Select personal data number:
• Press or button to select your personal
data number.
3. Set personal data will be successively displayed:
Then "0.0 kg" indicating. The monitor is ready to use and you may now start your
body analysis.
4.
Step onto measurement platform carefully with bare feet on the stainless steel
strips (measuring units) of the monitor and remain stationary.
Atfirst,yourweightwillbeindicated.Then,whiletheanalysisistakingplace,the
indication. A few seconds later after completion of the measurement
yourmeasuredvalues(bodyfatin%,musclein%,bonemassinkg,bodyhydrationin
%,BMRandBMI)willbeshowntwotimesalternately,andthenthemonitorswitch-
off automatically.
9. Weight function (weight measurement only)
1.Gentlysteponthemonitor,thenthemonitorwillbe
automatically turned on.
2. The monitor indicates “0.0 kg”. Now the monitor is
readytouse.Before0.0kgappears,pleasedon’tstepon
the monitor.
3.Steponthemonitor.Remainstationaryontheweighingplatformanddonothold
you tight.
4.Afterthemonitorlevelled-off,yourweightwillbeindicatedforapprox10seconds
steady.Afterwardsthemonitorswitch-offautomatically.
10. Error Messages
“LO“:
Batteriesareusedup-Pleasereplacethebatterieswiththeintendedtype
(3xAAA).
“Err“:
1. Not bare feet for taking body fat measurement.
2. Step off the monitor before body fat analysis procedure complete.
3. Not step onto the electrodes for body fat measuring.
4.Thesolesofyourfeetarenotclean,e.g.feetperspiration..etc.tointerfere
the body fat measurement.
“O-Ld“:
Theweightexceedsthemaximumcapacityof180kg.Pleaseimmediately
remove the critical load to avoid load cell damage.
“C“ :
Afterthemonitorindicates“0.0kg”,movethemonitoragain.
11. Technical Data
Capacityxgraduation:
max.180kgx100g
Displayresolution:
bodyfat:0.1%
Bodyfat:5.0~75.0%
Bodyhydration:5.0~75.0%
Bodymuscle:5.0~75.0%
Bonemass:0.5~22.6kg
Personalmemorylocation:
10positions
Age:
6–100years
Bodyheight:
80–220cm
Dimensions:
approx.300x300x24.4mm
Batteries:
3xAAA(included)
operationcondition:
0~40°C,≤90%RH
storagecondition:
-20~60°C,≤90%RH
*Subjecttotechnicalmodifications
www.rossmax.com
Instruction
Manual
EN
Model:
WF260
Manufacturer
: Rossmax Swiss GmbH
Tramstrasse 16, CH-9442 Berneck, Switzerland
www.rossmax.com
6. Unit switch
The monitor displays “0.0” hold button to select your desired unit from
“kg”(kilogram)to“lb”(pound)orto“st-lb”(stone:pound)
The monitor is ready to use and you may now start your body analysis. Before
0.0kgappears,pleasedon’tsteponthemonitor.Withoutfurtheractivitythemonitor
willautomaticallypower-off.Yourpersonaldataisstored.
Warranty Card
This instrument is covered by a 2 year guarantee from the date of
purchase, batteries and accessories are not included. The guarantee is
valid only on presentation of the warranty card completed or stamped
by the seller/dealer confirming date of purchase or the receipt. Open-
ing or altering the instrument invalidates the guarantee. The guarantee
does not cover damage, accidents or non-compliance with the instruc-
tion manual. Please contact your local seller/dealer or buying source or
www.rossmax.com.
Customer Name:
Address:
Telephone: E-mail address:
Gender: Male Female Age:
Product Information
Date of purchase:
Store where purchased:
OBM_IB_WF260_EN_SW_ver1552.indd 1
2015/12/28 上午11:12
