Rosslare Mifare CP-R25, Руководство по аппаратному и программному обеспечению

Страница: 36 / 52

Additional Programmer Utilities
CP-R25 Hardware & Software Manual Page 35
6.11 Verifying fingerprint enrollment on a User Card
Verifying fingerprint enrollment on a MIFARE User Card can be
done as a separate function or at the same time an enrollment
is preformed.
As an added security measure the CP-R25 Desktop
Programmer automatically does an internal verification to
ensure accuracy. That is why during the enrollment process,
more than one swipe is required.
To verify fingerprint enrollment on a MIFARE User Card:
1. Select the Swipe Reader tab.
2. In the Operations area select Finger utilities .
3. From the Operation Type drop down menu select Verify
live fingerprint .
4. Select the number of fingers that were enrolled for
verification.
5. For security reasons, the KeyA for the card needs to be
written, to keep the KeyA value, type the same value in the
New KeyA, the Confirm New KeyA, and the Current KeyA
fields.
6. Place the card on the CP-R25 Desktop Programmer
antenna area.
7. Click Start to begin programming the MIFARE card.
8. Instruct the person whose fingerprints are being verified to
swipe their finger on the finger sensor, located on the CP-
R25 Desktop Programmer, in the direction indicated by the
Fingerprint Directional Indication LED’s.
9. Follow the instructions messages in the Message Log area
to repeat the fingerprint swipe process once for each
template.