Rosslare Mifare CP-R25, Руководство по аппаратному и программному обеспечению

Страница: 19 / 52

AS-B01 Software Overview and LEDs
CP-R25 Hardware & Software Manual Page 18
User ID/Card Serial number user cards as well as
Reader configuration cards.
ƒ
Swipe reader – Used to write and read cards
containing fingerprint templates. This tab also allows
the creation of configuration cards for fingerprint
readers.
•
Message log area – this event log records all activities
provides the user with real time system monitoring. The
information messages may either be operation success or
failure messages, or instruction messages for example
during fingerprints enrollment.
•
Status information area – indicates connection status with
the CP-R25 Desktop Programmer hardware.
4.3 Indication LED’s:
The following table describes LED behavior on the CP-R25
Programmer (see Figure 2: CP-R25 Description).
General
Event Swipe Card
Reader LED Fingerprint
Reader
LED
Buzzer Fingerprint
Directional
Indication
LED
Power
on One red LED will light for several seconds followed by all the
LEDs flashing and the buzzer beeps 3 times for the duration
of 3 seconds each time
Card Programming
Event Swipe Card
Reader LED
Fingerprint
Reader
LED
Buzzer Fingerprint
Directional
Indication
LED
Card not
loaded Green flashing All off Off All on