Rosslare HLX-24TH Series, Руководство пользователя

Страница: 28 / 34

User Menu Options
28 HLX-24 User Manual
4. Specify the format in which the date is displayed: DD-MM-YY or MM-DD-
YY.
5. Press
Enter
to confirm your selection.
The date and time format is set.
8.8 Setting Zone Bypass
You can define certain zones to be bypassed when arming the system to deal
with different situations, such as when the sensors battery is low and is
sending an event, or when arming the system while someone is still on
premises in certain areas. In general, you need to also determine whether to
activate zone bypass.
This feature is available to both User and Master level users, and is only active if
it is set by the installer.
8.8.1 Enabling Zone Bypass
For the zone bypass option to work, the feature must first be enabled and at
least one zone must be enrolled and/or active.
If Zone Bypass is disabled, pressing
Enter
shows “BYPASS DISABLED”. If Zone
Bypass is enabled but there is no enrolled or active zone, pressing
Enter
shows
“NO ACTIVE ZONE”.
To enable zone bypass:
1. Using the
Menu
button, select
Zone Bypass
and press
Enter
.
2. Using the Menu and Enter buttons, access the
Set Activation
submenu.
3. Using the
Menu
button, choose to either
Activate
or
Deactivate
the
zone bypass feature.
4. Press Enter to save.
8.8.2 Defining Bypass Zones
You can define each of the 24 zones to be bypassed when arming the system.
The zone bypass is deactivated once the system is disarmed following the
bypassed arming.
To define bypass zones:
1. Using the
Menu
button, select
Zone Bypass
and press
Enter
.
2. Press Enter to access the
Select Zone
submenu.
3. Using the numeric keypad or the
Menu
button, select the specific zone to
define and press
Enter
to confirm your selection.
4. Using the Menu button, choose to either Bypass or Un-Bypass the
selected zone.
5. Press Enter to save your selection.