Ross Ultrix Acuity Скачать руководство пользователя страница 97

Страница: 97 / 115

Acuity Virtual Panel

The Acuity Virtual Panel is a browser based

virtual representation of an Acuity

™

control

panel with menu system. The virtual panel is

hosted either from the Acuity Rack Panel (ARP)

server or a physical Acuity

control panel. The

Acuity Rack Panel replaces the need for the

control panel, with the exception of not having

any of the ports (Remote and Tally) that are

present on the back of the control panel, and is

upgraded in the same way as a normal panel.

Important:

Refer to the documentation that came

with your Acuity Rack Panel for information on cabling

and powering on the server.

To Launch the Acuity Virtual Panel

The Acuity Virtual Panel provides a virtual

representation of an Acuity

control panel, Shot

Box, or auxiliary control panel, as well as the

menu interface.

Note:

If you are connecting to a physical control panel, the

Virtual Panel Enable Personality option must be set to On.

Note:

The Acuity Rack Panel ships in DHCP mode by default.

The IP address that it has been assigned by your network is

shown on the diagnostic display on the front of the server.

Open a web browser and navigate to the IP

address of the Acuity Rack Panel, physical

control panel, or SoftPanel.

Tip:

Click Logout to close the Acuity Virtual Panel. Click

About > Acuity User Guide to launch the Acuity webhelp

in a new tab.

Point to

Panel

and select the size of control

panel you want to use.

Click

Open Panel VNC

to open a window

with the menu system.

Login:

type

user

and press

Enter

Password

type

password

and press

Enter

Tip:

Click Close Panel VNC to close the menu system

window.

Point to

Add-On Modules

and select the

Shot Box or Aux Panel that you would like

to use instead of the panel.

Point to

Options

to configure the Acuity

Virtual Panel interface.
•

Background Off

— turns off the

background image on the page.

•

Block Multiple Users

— prevent multiple

users form logging in to the same Acuity

Rack Panel.

•

Transparency Off

— turns off the

transparency effect applied to the panel

and the border of the menu.

•

Position Lock

— lock the panel and menu

in their current positions.

•

Zoom Lock

— lock the panel and menu

at their current zoom level.

•

Smaller Zoom Steps

— reduce the rate

for zooming in/out from the panel.

•

White Button Labels

— switches the

labels on the panel buttons to white. This

does not change the color of the

mnemonic text.

•

Swap to Top Lock

— locks to panel and

menu to their current order. If the panel

is covering the menu the menu does not

jump to the top when you hover over it

or click on it.

•

Follow Browser Resize

— the virtual

panel resizes with the size of the browser

window.

•

Open VNC in New Window

— opens the

menu system in a new browser tab.

•

Set Page as Default

— sets the current

virtual panel as the default panel.

•

Reset Position

— resets the panel and

menu to their default positions.

•

Save Position

— saves the current

position and size of the panel and menu,

as well as the setting on the

Options

menu.

•

Restore Position

— recalls the settings

stored using the

Save Position

The AVP Interface

An overview of the interface of the Acuity

Virtual Panel.

Tip:

You can use the virtual panel with a touchscreen monitor

if required. Touch events are treated as mouse clicks and

multi-touch and drag events are also supported.

Ultrix Acuity Operation Manual (v10.1) — Acuity Virtual Panel • 97

Содержание Ultrix Acuity




















































































































Результаты поиска

Содержание Ultrix Acuity

Отзывы:

Ross Ultrix Acuity, Руководство по эксплуатации, Страница: 97 / 115

Результаты поиска

Содержание Ultrix Acuity

Отзывы: