Ross Ultrix Acuity Скачать руководство пользователя страница 92

Страница: 92 / 115

). A positive value moves the

ripples right to left and a negative

values move the ripples left to right.

A value of

causes the ripples not to

move.

•

Horizontal Params

— press and then use

the

Amplitude

Wavelength

, and

Rate

knobs to adjust the appearance of the

waves moving horizontal.
•

Amplitude

— adjust the height of

ripples.

•

Wavelength

— adjust the width of the

of ripples used, or the number of the

ripples.

•

Rate

— adjust the speed that the

ripples move along the horizontal

sides of the pattern (

Animation

must

). A positive value moves the

ripples top to bottom and a negative

values move the ripples bottom to top.

A value of

causes the ripples not to

move.

To Edit Wash and Matte Generator

Assignments

Edit and assign the matte and wash generators

on the switcher.

Press

HOME

More

Effects

BKGD Gen

Setup

Use the

knob to select the ME that you

want to edit the generator for.

Use the

Generator

knob to select the

generator you want to edit.

Use the

Generator Type

knob to select how

you want the selected generator configured

(

Wash

Matte

Press the

Color 1

Color 2

button to edit

the matte color, and the

Wash 1

Wash 2

button to edit the wash.

Tip:

Press Default Colors to default the colors of the

selected generator.

Washes

The wash generator allows you to fill a wipe

border, color background, matte fill, or preset

pattern with a pattern wash (color gradient),

another video source, noise, or superblack.
• Pattern Wash — apply a pattern as the basis

for the color gradient wash.

• Video Wash — apply a video source as the

basis of the wash.

• Noise — apply video noise as the basis of the

wash.

• SuperBlack — set the wash color to output

superblack.

To Set Up a Pattern Wash

Press

HOME

More

Effects

BKGD Gen

Setup

and use the

and

Generator

knobs

to select the background generator you want

to set up and use the

Generator Type

knob

to select one of the

Wash

generators.

Tip:

There are several ways to get to this menu directly

from the key, border, or pattern you are setting up.

Press

ME x - Wash 1

depending on the wash generator you are

using.

Press

BKGD type

and use the

Type

knob to

select

Pattern

Press

Pattern Selection

and adjust the

pattern as required. Refer to

Patterns

page 91 for pattern setup information.

Press

Back

to return to the Modify Wash

menu.

Press

Modify Color 1

Use the color picker to select the color you

want to use. Refer to

Color Picker

on page

25 for information on using the color picker.

Note:

If the Matte Limit personality option is active, the

RGB color space is not available. You will only be able to

make color selection in the HSL color space.

Tip:

Press Default Colors to go back to the original, default

colors. The color selections for the ME and Wash will be set

back to default.

Press

Color1

Color2

to switch between the

colors.

To Set Up a Video Wash

Press

HOME

More

Effects

BKGD Gen

Setup

and use the

and

Generator

knobs

to select the background generator you want

to set up and use the

Generator Type

knob

to select one of the

Wash

generators.

Tip:

There are several ways to get to this menu directly

from the key, border, or pattern you are setting up.

Press

ME x - Wash 1

depending on the wash generator you are

using.

92 • Patterns, Washes, and Mattes — Ultrix Acuity Operation Manual (v10.1)

Содержание Ultrix Acuity




















































































































Результаты поиска

Содержание Ultrix Acuity

Отзывы:

Ross Ultrix Acuity, Руководство по эксплуатации, Страница: 92 / 115

Результаты поиска

Содержание Ultrix Acuity

Отзывы: