Ross Ultrix Acuity, Руководство по эксплуатации, Страница: 86 / 115

• Move — copy the source custom control
to the destination and delete the events
in the source custom control. Only the
destination custom control has the events
from the source.
• Swap — copy the events from the source
custom control to the destination, and
the events from the destination custom
control the source. The events that used
to be in the source will be in the
destination, and the events that used to
be in the destination will be in the source.
Deleting Custom Controls
You cannot delete a custom control if the custom
control is running on another panel connected
to the system.
To Delete a Custom Control
1. Press HOME > Custom Controls .
2. Use the Bank and Button knobs to select the
custom control that you want to delete.
3. Press Delete Macro > Confirm .
The mnemonic for the button the custom control
is assigned to goes dark when the custom control
is deleted.
Attaching Custom Controls to Panel
Buttons
You can attach a custom control to any button
on the control panel or auxiliary control panel
mapped to an internal panel row. This does not
include the buttons on the touchscreen display,
custom control bus, or Shot Box.
Custom controls are attached to the physical
button on the ME, and not the function of the
button. This means that if a custom control is
attached to a crosspoint button, changing the
bus map, or using the shifted bus, does not affect
the custom control attachment to the original
button. For example, if you attach a custom
control to a crosspoint button on ME 1, the
custom control runs if you press that button, or
Shift and that button. If you assign the ME to a
different panel row, the custom control
attachment follows the ME to the new panel
row.
If you include a button in a custom control that
has another custom control attached to it, the
command to run the second, attached, custom
control is ignored when the initial custom
control is run. This does not apply to actual
custom control buttons.
Note: The CC/Macro Attachments personality option must be
set to on for custom controls attached to control panel buttons
to be executed when that button is pressed.
Custom controls are attached either after
(Post-Attach), before (Pre-Attach), or instead-of
(Replace) the function of the button.
Tip: If you attach a custom control to a crosspoint button on
the keyer bus, the Show CCs on Key Bus personality option allows
you to have the name of the custom control shown on the
mnemonic for that button.
To Attach a Custom Control to a Panel Button
Note: When you attach a custom control to a panel button, the
association is with the custom control button, and not the custom
control. If you change which custom control is assigned to the
custom control button, that change is also applied to the
attachment.
1. Press HOME > Custom Controls > More >
Attach Macros .
2. Press the button on the control panel or local
auxiliary control panel that you want to
attach a custom control to. Only auxiliary
control panels that are mapped to internal
panel rows can have custom controls
attached to the buttons.
Tip: Press Show Attach to show the control panel button
that you are attaching the custom control to (On).
3. Use the Bank and Macro knob to select the
custom control that you want to attach to
the selected button.
4. Use the Attach Type knob to select how the
custom control is attached to the button.
•
Post-Attach — attach the custom control
after the normal action of the button.
When the control panel button is pressed,
the normal function of the button is
executed, followed by the custom control.
For example, if the action of the button
is an auto transition, the switcher will
start the transition and then execute the
custom control. The switcher does not
wait for the transition to complete before
executing the custom control.
• Pre-Attach — attach the custom control
before the normal action of the button.
When the control panel button is pressed,
the custom control is run, followed by
the normal function of the button. The
switcher does not wait for the custom
86 • Custom Controls — Ultrix Acuity Operation Manual (v10.1)