Ross Ultrix Acuity Скачать руководство пользователя страница 84

Страница: 84 / 115

If a custom control contains pauses or holds, a

timeline is shown, indicating the duration of the

custom control, and at which points different

events will occur.

Note:

You can only edit a custom control on the same panel it

was recorded on, or a panel with the exact same settings,

including ME assignments and bus maps.

Understanding the Edit Custom Control Menu

The Edit Custom Control menu has a number

of buttons to help you navigate and edit the

events in your custom control.

Description

Menu Item

jumps to the first event in the custom

control.

Go To Start

allows you to insert events before the

selected event.

Insert Event

delete the currently selected event.

Delete

Event

modify the currently selected event. Only

some events can be edited - other events

must be deleted and inserted back it to

change them.

Modify

Event

executes the currently selected event.

Run Single

Event

runs the rest of events in the custom

control from the currently selected event

to the end.

Run From

Here

move the selected event up one item in the

list.

Event Up

move the selected event down one item in

the list.

Event Down

cut the selected item from the list to the

clipboard.

Event Cut

copy the selected item from the list to the

clipboard.

Event Copy

paste the event from the clipboard to just

above the selected item.

Event Paste

To Edit a Custom Control Event

Press

HOME

Custom Controls

Use the

Bank

and

Button

knobs to select the

custom control that you want to edit.

Press

Edit

Note:

If you are editing a Relative Custom Control,

<relative> appears next to the Bank and Button

identification, and the relative ME level (R LVL) is displayed

instead of the ME number.

Tip:

If the custom control contains unsupported events,

the name of the custom control will appears red and when

edited the unsupported events will also appear red.

Use the

Event

knob to select the event that

you want to edit.

Press the

Event Up

Event Down

buttons to

move an event up or down in the list, or

press

Event Cut

Event Copy

, and

Event

Paste

to move an event to a new location in

the list.

Press

Modify Event

to edit the selected

event.

Tip:

When editing an event, press Offline Mode on (ON)

to have the switcher not execute that event as it is being

added to the custom control.

The menu to edit the event appears in the

upper menu area.

Modify the event in the same way you would

have inserted it and press

Modify Event

Note:

You cannot edit a Personality event. To change the

value of a personality event, insert the correct event and

delete the old event.

To Insert a Custom Control Event

Press

HOME

Custom Controls

Use the

Bank

and

Button

knobs to select the

custom control that you want to edit.

Press

Edit

Note:

If you are editing a Relative Custom Control,

<relative> appears next to the Bank and Button

identification, and the relative ME level (R LVL) is displayed

instead of the ME number.

Tip:

If the custom control contains unsupported events,

the name of the custom control will appears red and when

edited the unsupported events will also appear red.

Use the

Event

knob to select the event that

you want to insert an event in before.

Press

Insert Event

• Insert control panel events.
• Press

Insert Special

to insert special

events.

Tip:

Press Cancel Inserting to stop inserting and leave

the custom control unchanged.

Press

Finish Inserting

On-Air/Off-Air Run Custom Control

You can assign a custom control to a video input

where the custom control is triggered when that

84 • Custom Controls — Ultrix Acuity Operation Manual (v10.1)

Содержание Ultrix Acuity




















































































































Результаты поиска

Содержание Ultrix Acuity

Отзывы:

Ross Ultrix Acuity, Руководство по эксплуатации, Страница: 84 / 115

Результаты поиска

Содержание Ultrix Acuity

Отзывы: