If you select a
or
transition,
additional selections are required.
5.
Toggle
ROLL CLIP
on if you want any video
server clips assigned to a source being taken
on-air to play with the transition.
6.
Perform the transition.
• Auto Transition — Press
AUTO TRANS
.
The transition is performed at the set
transition rate.
• Cut — Press
CUT
.
• Fader — Move the fader from one limit
to the other. The rate at which you push
the fader determines the rate of the
transition.
Tip:
You can preview the transition on the preview output
by pressing and holding the transition type button and
performing the Auto Trans or Fader transition.
If a pre-roll time has been set, and Roll Clip
is active, the switcher will apply the pre-roll
interval before performing the transition.
Split ME Functionality
The Split ME functionality allows you to take
advantage of the configurable program outputs
feature to create two semi-independent MEs
(Program A and Program B) in a single ME.The
A-side and B-side can be transitioned
independently using the
PGM A
and
PGM B
buttons on the Transition module.
Keep the following in mind:
Keep the following in mind when working with
a split ME.
• Sources selected on the background and
preset buses of the A-side or B-side are
independent of each other.
• You can transition the A-side separately, the
B-side separately, or both together.
• Keys are independent of the A-side or B-side
and appear in the output of either side
depending on whether they are included in
the configurable program output.
• The A-side and B-side can have different ME
transition rates. If both sides are selected and
a transition is performed, the A-side and
B-side will use their set transition rates.
• If the A-side and B-side are both performing
a sequence they must start transitioning at
the same time.
• Both the A-side and B-side tally
independently when re-entered on-air.
However, only the A-side can tally sources
selected on it.
• The utility buses and B-side are included with
the A-side for TSL tallies. You can select to
have the B-side/utility buses no included with
the TSL tallies.
• The B-side uses the User Colors (ME 1 = User
1, ME 2 = User 2 and so on) for the glow color.
Transition Rates
Transition rates set how much time, in frames,
the switcher takes to perform an Auto
Transition. For example, with a dissolve, the
transition rate is how long it takes for the first
video source to be replaced by the second.
Transition rates are set for the ME, keyers, and
AuxKey. The rate for an ME is shown on the
display on the Effects Memory Module, and on
the Transition Module.
REG:00 Memory0
M:015 D:008 F:20
ME Rate
Key Rate
Fate to Black
Rate
Figure 4: Transition Rate - Global Memory Module
Tip:
You can use the Default Trans Active personality option to
set a default key and ME rate that is used when the ME, or
switcher, is defaulted.
ME Rates
The ME rate, or background transition rate, can
be set from either the Global Memory or
Memory modules.
To Set an ME Rate
1.
Press and hold
ME RATE
on the Global
Memory module.
Tip:
You can also press ME RATE on the Effects Memory
module for the ME that you want to set the background
transition rate for.
2.
Press the
ME X
button in the Store or Recall
area for the ME you want to set the
background transition rate for.
3.
Use the keypad to enter a new duration, in
frames. The new rate appears on the top line
of the display as you enter it.
4.
Press
ENTER
to set the new rate.
34 • Transition — Ultrix Acuity Operation Manual (v10.1)
Содержание Ultrix Acuity
Страница 1: ...Ultrix Acuity Operation Manual v10 1...