manualshive.com logo in svg

Ross Ultricore RCP-ME, Руководство пользователя, Страница: 77 / 98

Поделиться
Скачать
Ross Ultricore RCP-ME Скачать руководство пользователя страница 77

RCP-ME User Guide (v4.0)

Monitoring • 77

Monitoring

This chapter provides information on the display options for the LCD, how to monitor the panel via DashBoard, 
general tips to troubleshoot common problems, and briefly summarizes the steps required to update the firmware on 
the hard panel

Adjusting the Contrast for the LCD

You can fine tune the display contrast of the LCD on the front panel.

To adjust the contrast

1. Insert a Phillips head screwdriver into the 

Display Contrast

 trim-pot on the rear panel of the RCP-ME.

2. Adjust the trim-pot until the contrast suits your environment and viewing requirements.

Viewing Status and Alarms in DashBoard

An indication that alarms are present for a device is visible in the 

Basic Tree View

 pane. If a device has one or more 

alarms, a small circle appears in the icon for the device.

Figure 15.1  Basic Tree View pane showing device with status/alarm indication

The status and alarms are also viewable in the Configuration tab of the Panel Config interface.

To view the status and any alarms for an RCP-ME

1. Open the RCP-ME Panel Config interface (see “

To open the RCP-ME Panel Config interface

” on page 22).

2. Select the 

Configuration

 tab.

3. View the status and alarms in the 

Alarms

 section.

The status of the RCP-ME is shown via a number of colored buttons and labels:

•

Green

 – device is connected and operational.

•

Yellow

 – alarm is active. For example, a protect is active on the panel.

•

Red

 – device has been rebooted. Refresh the 

Basic Tree View

 in DashBoard to clear this status.

•

Orange

 – no active DashBoard connection. A forced connection is required.

Status/Alarm indicator

Содержание Ultricore RCP-ME



































































































Отзывы:

Нет отзывов