manualshive.com logo in svg

Ross Ultricore RCP-ME, Руководство пользователя, Страница: 23 / 98

Поделиться
Скачать
Ross Ultricore RCP-ME Скачать руководство пользователя страница 23

RCP-ME User Guide (v4.0)

Getting Started • 23

The 

Panel Config

 interface opens.

Adding the RCP-ME to the DashBoard Tree View

In order to access the RCP-ME in DashBoard and configure its settings, the RCP-ME needs to be detected and the 
IP address for the LAN configured for use within a network using Walkabout. Once the network settings are 
configured in Walkabout, the RCP-ME is visible in DashBoard and you can update the panel device details, button 
assignments, and a configuration file sent to it.

Ensure that DashBoard has all the latest module updates before proceeding.

For More Information on...

• checking and upgrading firmware, see “

Checking the Firmware Version

” on page 78 and “

Upgrading the 

Firmware Version

” on page 79.

• saving parameters to a configuration file, see “

Saving the Current Configuration for the RCP-ME

” on 

page 73.

• installing and using DashBoard, refer to the 

DashBoard User Manual

.

Adding an RCP-ME to DashBoard via Automatic Discovery

The RCP-ME can be detected in DashBoard using auto discovery via SLP once the IP address for the LAN has been 
configured for use within a network using Walkabout.

To add an RCP-ME to the Tree View in DashBoard

1. Launch DashBoard.

2. From the DashBoard client main toolbar, select 

File

 > 

Show

 

Walkabout

. 

The DashBoard window displays the 

Walkabout

 table.

3. Click 

Refresh

 to query the network for RCP-ME devices.

4. In the 

Walkabout

 table, locate the RCP-ME you want to add to DashBoard.

5. Configure the following information if necessary:

•

Name

 – double-click inside the cell to enter a name for the RCP-ME. The default is RCP-ME.

•

Address

 – double-click inside the cell to enter an IP address for the RCP-ME. The default is 

192.168.20.130.

Содержание Ultricore RCP-ME



































































































Отзывы:

Нет отзывов