Ross Ultricore RCP-ME Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 98

Ross Ultricore RCP-ME Скачать руководство пользователя страница 21

RCP-ME User Guide (v4.0)

Getting Started • 21

Connecting to a Routing System



The RCP-ME is designed for installation into a standard 19” equipment rack. It has integrated rack ears, allowing
it to be screwed in using standard screws and cage nuts.

To connect the remote control panel in the routing system

1. Place the RCP-ME into the rack frame and then fix in place with appropriate fasteners.

2. Connect a standard CAT5/5e/6 Ethernet cable to the

ETHERNET

connector on the rear of the RCP-ME.

3. Connect the other end of the standard CAT5/5e/6 Ethernet cable to the network TCP switch/hub.

Connecting to a Power Source

The RCP-MEis powered using the 5V 2A power supply provided. This power supply connects directly to the AC
mains supply.

To connect the remote control panel to a power source

1. Connect the 5V 2A power supply provided to the

POWER

connector on the rear of the RCP-ME.

2. Connect the cable from the power supply to a suitable AC mains supply.

Basic Configuration

Keep the following in mind before proceeding with the basic configuration of your panel:

• The DashBoard client software allows configuration and monitoring of the RCP-ME via a computer connected

to the same network as your routing system.

• DashBoard must be run on a computer that has a physical wired ethernet connection. Wireless connections do

not allow device discovery.

• You must have an NK-NET, NK-IPS, or Ultricore Central Controller connected to the T-BUS system to connect

to NK Series devices.

• The RCP-ME can be added to DashBoard via automatic discovery or manually using the NK-IPS Connection

window. Both methods are described below.

• The DashBoard client software can be downloaded from http://www.rossvideo.com/.

Using DashBoard

When the RCP-ME is attached to the network, it is interrogated and its configuration interfaces are made available
in the DashBoard window. The RCP-ME interfaces are accessed by expanding the RCP-ME node in the DashBoard
Tree View and selecting the appropriate sub-node.



You cannot access the RCP-ME interfaces until the RCP-ME displays in the Tree View in DashBoard.

There are two main RCP-ME interfaces in DashBoard: Connection Editor and the Panel Config. Each interface is
represented as a sub-node under the main RCP-ME node.

To launch DashBoard

1. Verify that you have installed the DashBoard client software version 8.2 or higher on a PC connected to the

same network as your routing system.

2. Launch DashBoard by double-clicking its icon on your PC desktop.

Warning

— Ensure that the AC mains supply complies with the PSU specification before making the

connection.

Warning

— An earthed neutral mains supply and residual current device is recommended for safe

operation.

«
...
19
20
21
22
23
...
»

Содержание Ultricore RCP-ME



































































































Отзывы:

Нет отзывов