manualshive.com logo in svg

Ross TES9, Руководство пользователя программного обеспечения

Поделиться
Скачать
Ross TES9 Скачать руководство пользователя страница 37

TES9 Software User Manual (Iss. 04)

Captioning Module • 5–3

Features

This section provides a brief overview of the Captioning Module features.

Data IDs

The Data ID and Secondary Data ID fields specify the hexadecimal values to be used for the 
corresponding fields in the encoded Ancillary Data Packet, as defined by SMPTE 291M. It 
should be noted that the TES9 is shipped with these fields set to the values specified by SMPTE 
334M (61/1), and therefore it is normally not necessary for the user to change these fields. 

Line Selection

For Line Selection, radio buttons are used to select the chroma or luma channel. The VANC line 
is selected using a pull down list. 

Caption Service Information Defaults

The fields in this section specify the data for the Closed Caption Service Information for each 
caption service being inserted. The Language field specifies the 3-character language code as 
given in ISO 639.2/B. The Easy Reader check box indicates that the closed caption service 
contains text tailored to the needs of beginning readers.

Содержание TES9





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды