manualshive.com logo in svg

Ross TES9, Руководство пользователя программного обеспечения

Поделиться
Скачать
Ross TES9 Скачать руководство пользователя страница 24

3–8 • Encoder Configuration

TES9 Software User Manual (Iss. 04)

Current Video Format Field

This field displays the current video format description for the selected program. It is only read 
when the setup software starts and will not change if the video mode is changed while in setup.

Requested Video Format Field

The Requested Video Format controls how the program will respond to the video on that 
program. The format can be either set to a specific format or to work with any video format in 
either HD or SD. If set to a specific format then that format must be present or the TES9 will not 
insert data, and the VIDEO LED will turn yellow to indicate that the video format is not correct.

If the 

Requested Video Format

 is set to 

Any HD Video

 then the TES9 will automatically adapt 

to the video as long as it is a known HD format. Modules which format data differently for the 
different video formats will operate correctly for the detected video.

Line Usage Button

Clicking the 

Line Usage

 button displays a dialog to control how lines will be used. 

Line Usage Dialog

This dialog allows you to specify what to do with data that may already be on a VANC line. If you 
select the 

Append

 check box then the data on the line will be preserved and any new data will be 

added to the end of the line. If the 

Append

 box is left unchecked then data already on the line will 

be erased if any streams are configured to use that line for insertion. Control of overwriting 
upstream data is on a line by line basis and is separate for the chroma and luma channels. It is 
possible to have different settings for different lines.

If you are appending data to a line then you may reserve bytes on the line for the existing data. 
This setting can normally be ignored (set to zero). If you will be filling the line with the 
combination of existing data and inserted data, then it is wise to reserve the space required for 
existing data so that the line cannot be over filled by inserting data. 

Note

 — Lines that are assigned to a Transparent Stream configured for High Capacity 

cannot be used by any other stream, and any upstream data on any of the assigned lines 
will be overwritten. 

Note

 — If you select to append data to a line and a caption data packet is being inserted, 

then the caption data packet is actually added before any existing packets but all other 
inserted packets are added after all existing packets. That is, the caption packet is inserted 
at the front of the line. It is followed by any packets which existed on the line and then any 
other inserted packets are append to the end of the line. 

Содержание TES9





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды