Ross Synergy MD, Инструкция по эксплуатации, Страница: 344 / 388

12–2 • Completing Setup Synergy Q/MD Engineering Manual (v9.1 MD)
About Synergy Q/MD File Storage
The Synergy Q/MD file storage system arranges those portions of the switcher that are
software-configurable (and user-configurable) into the following categories of registers.
• Memory Registers
This category stores and recalls MLE settings or “snapshots” of the various switcher
MLEs. A memory register can be programmed from several locations on the panel: in
the
Global Memory System group or in an individual MLE Memory group. If the
Squeeze & Tease MD option is installed, all 100 S&T MD memories are stored in a
separate memory file.
• Custom Control Registers
This category stores and recalls the functions that you have programmed into the
Custom Control group of the switcher. These functions can include external device
control commands and other panel-specific macros (programmable keys).
• Personality Registers
This category stores and recalls settings that are user-configurable, and which apply to a
particular
style of operation rather than to basic installation parameters. The following
data is contained in the file:
• VTR Clip Registers
This category stores and recalls VTR clip registers (in timecode format).
• Favorite CG Setup • All Preview Overlay
• Time Clock Direction • User Wipes
• Transitions (on which the Time
Clock resets)
• CG Mode, Channel and
file/folder settings
• Time Clock Reset Time • Double Press Rate
• Time Clock Position • Memory Bank Cycle Max
• VTR Time Code Position • Memory Attributes
• Source ID Position • Matte Limit
• Mnemonics • Auto-Recall
• PIP-II Memory • DSK Cut and Isolation Settings
• Audio Transitions • S&T MD Button Pattern
• Preset Black • Panel Sleep Time
• Fade to Black • Bus Map Assignment