Ross Synergy MD, Инструкция по эксплуатации, Страница: 331 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Additional Installation Setups • 11–29
~
720p 60
— Select this option to have the switcher operate in a 720 progressive
format at a frequency of 60 Hz .
~
720p 50
— Select this option to have the switcher operate in a 720 progressive
format at a frequency of 50 Hz.
~
1080i 59.94
— Select this option to have the switcher operate in a 1080
interlaced format at a frequency of 59.94 Hz .
~
1080i 60
— Select this option to have the switcher operate in a 1080 interlaced
format at a frequency of 60 Hz .
~
1080i 50
— Select this option to have the switcher operate in a 1080 interlaced
format at a frequency of 50 Hz .
~
1080p 24
— Select this option to have the switcher operate in a 1080
progressive format at a frequency of 24 Hz .
~
1080pSF 29.97
— Select this option to have the switcher operate in a 1080
progressive segmented frames format at a frequency of 29.97 Hz .
~
1080pSF 30
— Select this option to have the switcher operate in a 1080
progressive segmented frames format at a frequency of 30 Hz .
~
1080pSF 25
— Select this option to have the switcher operate in a 1080
progressive segmented frames format at a frequency of 25 Hz .
5. Reset the video format of all Input BNCs to the video format of the switcher as follows:
• Press
Reset Input BNC Format
to have the switcher set all Input BNCs to the
same video format that the switcher is currently operating in.
6. Press
HOME
to display the Installation Change Confirmation Screen .
7. Accept or reject the changes you have made as follows:
• Press
Confirm
to accept the changes.
• Press
Cancel
to exit the menus safely, without making any changes. The system
returns to the previously stored settings.
This completes the procedure for setting the reference format for the switcher
Internal and External Reference
Normally, you use an externally generated reference to synchronize video signals in your switcher.
However, Synergy Q/MD switchers can generate an internal reference signal for use when no external
reference is present. This is useful for demonstration or testing purposes and is not intended for
production applications. The internal reference signal can only synchronize internally generated
sources (e.g., Global-Stores). External crosspoints can not be synchronized to an internal reference
signal.
The switcher can generate the following internal reference signals:
•
1080i 59.94
— generates an internal reference of 1080 interlaced at a frequency of
59.94 Hz .
•
1080i 50
— generates an internal reference of 1080 interlaced at a frequency of 50 Hz .
•
1080p 24
— generates an internal reference of 1080 progressive at a frequency of 24
Hz .
•
1080pSF 24
— generates an internal reference of 1080 progressive segmented frames
at a frequency of 24 Hz .