Ross Synergy MD, Инструкция по эксплуатации, Страница: 22 / 388

1–4 • Introduction Synergy Q/MD Engineering Manual (v9.1 MD)
Documentation Terms
The following terms are used throughout this guide:
• “ Switcher ” refers to the entire Synergy Q/MD Live Production Engine, consisting of its
electronics frame and control panel.
• “ Frame ” and “ Electronics Frame ” both refer to the electronics chassis of Synergy
Q/MD Live Production Engine.
• “ Operator ” and “ User ” refer to the person who uses the Synergy Q/MD Live
Production Engine.
• “ Control Panel ” both refer to the large multi-button control panel of the Synergy Q/MD
Live Production Engine.
• “ SDI ” refers to Serial Digital Video, a digital video signal that is distributed via a single
coaxial cable with BNC connectors.
• “ Video System ” refers to the mix of interconnected digital equipment (including the edit
controller, VTRs, Video Servers, etc.) in which the Synergy Q/MD Live Production
Engine is included.
• “ Storage device ” refers to the hardware used to save and recall setups, configurations
and registers of the Synergy Q/MD Live Production Engine. Examples of storage
devices are the internal hard drive and a USB Drive.
• “ Bottom MLE ” refers to the lowest, or Program/Preset, MLE on each switcher. This
MLE is typically the MLE to provides the main program output of the switcher, and
includes the Downstream Keyers. On a
Synergy 2 Q/MD , for example, this would be
MLE 2 .
• “ Half MLE ” refers to the bottom, or Program/Preset, MLE on the Synergy 1.5 and 2.5
Q/MD Switchers . The Mix/DSK option is applied to this MLE.
• “ Full MLE ” refers to the full featured MLEs of a switcher. On a Synergy 2.5 Q/MD ,
for example, MLEs 1 and 2 are Full MLEs, because they are fully functional, but MLE
3 is a Half MLE.