Ross Synergy MD Скачать руководство пользователя страница 140 | Manualshive

Страница: 140 / 388

Ross Synergy MD Скачать руководство пользователя страница 140

6–4 • Software Upgrades and Options

Synergy Q/MD Engineering Manual (v9.1 MD)

Synergy MD/X Web Interface

The

Synergy MD/X Web Interface

is included with the Synergy Q/MD software. You use the

Synergy MD/X Web Interface to obtain system information from your switcher, perform software
upgrades, manage switcher file-sets, and configure user access to the Synergy MD/X Web Interface.

Accessing the Synergy MD/X Web Interface

You access the Synergy MD/X Web Interface via a web browser on a computer that has network
access to your Synergy Q/MD switcher.

Before using the Synergy MD/X Web Interface, you need a user account. The Synergy MD/X Web
Interface supports a single user name and password which can be changed from within the Synergy
MD/X Web Interface. Refer to the section “

Changing the Synergy MD/X Web Interface Account

on page 6-17 for information on creating and managing the user account.

Use the following procedure to access the Synergy MD/X Web Interface:

1. On your computer, open your Web Browser and, in the address bar, type in the IP

address of your switcher to display the

Synergy MD/X Web Interface Splash Screen

.

Synergy MD/X Web Interface Splash Screen

2. Wait a few seconds or click on the logo and the login window appears.

3. In the

Name

field enter the Synergy MD/X Web Interface user name.

4. In the

Password

field enter the password.

5. Click

OK

to start the Synergy MD/X Web Interface and display the

System Info Page

.

Note

The current versions of Internet Explorer, Mozilla and Netscape are
supported. If you have any problems, please contact Ross Video
Technical support.

Note

If your computer is not on the same network as your switcher or has no
network route to that network, the Synergy MD/X Web Interface will
not be available. Contact your IT department for assistance.

Note

If you do not know the user name or password contact your IT
department or Ross Video Technical Support.

«
...
138
139
140
141
142
...
»

Содержание Synergy MD





































































































































































































































































































































































































Отзывы:

Нет отзывов