Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 95 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–17
2. Toggle the
AudioTrans
softkey to
Pgm
or
All
to set the audio transition personality.
•
Pgm
— This option tells the switcher to perform an audio transition only when a
Program MLE is transitioned.
•
All
— This option tells the switcher to perform an audio transition when any MLE
is transitioned.
This concludes the procedure to configure the Audio Transition option.
White Flash
White Flash is a single button effect that allows you to set the flash color and timing of a transition.
Once enabled, this effect performs a double transition from
PGM to White Flash to PST using a free
background color generator to produce the White Flash instead of Preset Black. This is achieved by
enabling the White Flash effect, setting the color and timing of the transition and using the
PST
BLACK button in the Program/Preset Transition Group .
Use the following procedure to configure the White Flash effect:
1. Navigate to the Personality Menu 3-4 as follows:
• Press HOME B MORE B Setup B Personality B MORE B MORE .
2. Toggle the White Flash softkey to On to display the White Flash Setup Menu .
White Flash Setup Menu
3. Set the timing of the White Flash as follows:
• Use the Onset Rate knob to set the transition rate (0 to 150 frames) from PGM to
the White Flash.
• Use the Hold Time knob to set the length (in number of frames) of the White Flash
before fading out.
• Use the Fade Rate knob to set the transition rate from the White Flash to PST .
4. Press Color to display the Color Selection Menu .
Note
The White Flash effect differs from Preset Black because it
automatically performs the transition when
PST BLACK
is pressed.