Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 37 / 332

Synergy Series Operation Guide (v18) Introduction • 1–21
Still Store (Chyron Aprisa) Interface
This option enables serial ports for control over the Chyron Aprisa Still & Clipstore. It allows a user to
randomly access any still or clip under control from Synergy. Custom Control macros can also be
created for quick and direct access to clips and switcher scene recalls.
Character Generator Interface
This option enables the serial ports for control over the Character Generator. It allows a user to load
and run effects, load and navigate through a playlist or a CG template, and edit CG text directly from
the Synergy control panel.
Small Audio Mixer Interface (16 and fewer Inputs)
This option enables serial control for enhanced audio follow video from Synergy over small audio
mixers, making an integrated A/V production possible.
This protocol supports the associating of any audio input with any video input. It also supports easy
audio voice-over control and audio level control from the Synergy panel.
Large Audio Mixer Interface (more than 16 Inputs)
This option enables serial control for enhanced audio follow video from Synergy over large audio
mixers, making an integrated A/V production possible.
This protocol supports the associating of any audio input with any video input. It also supports easy
audio voice-over control and audio level control from the Synergy panel.
Robotic Camera System Interface
This option enables serial control over robotic camera systems including pan, tilt, zoom, focus, and
scene recalls.
Router Control
The Router Control Option allows you to control an external routing switcher directly from the
switcher panel. With the option installed, you can assign a BNC as the routing switcher and dial up the
desired router crosspoint from the
Router Matrix Control Menu . Setup parameters allow you to
select the “type” of router, the router’s output BNC and the router’s level.
Serial Tally Interface
The Contribution Serial Tally Protocol Option allows you to set up communication parameters
with tally system interface equipment using industry standard protocol. Note that the standard parallel
tally interface will continue to operate normally when this option is enabled.
Video Server Control
The Video Server Control Option controls up to 16 video servers and 32 video channels, directly
from the switcher panel. Interfaced servers must use either the Harris (Louth) VDCP, or the Sony
(Betacam) protocol. The option consists of software plus integrated circuits that install on the Control
Panel’s “
Panel CPU ” board.
With the option installed, the following functions are available:
• Using the VTR Clips menu, you can set up a list of server clips that you want to use on
air, name them, preview them, trim each clip’s head and tail and enable (or disable) each