Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 240 / 332

7–66 • Keying Synergy Series Operation Guide (v18)
~ For wipes and flying keys, move the Positioner left and right to control the
image’s horizontal position on screen.
~ For wipes and flying keys, move the Positioner up and down to control the
image’s vertical position on screen.
~ For flying keys only, twist the top knob clockwise and counter-clockwise to
zoom the key’s size in and out.
• When the MENU button is on, the Positioner ’s current settings are temporarily
ignored — but stored in memory. The Positioner ’s function now applies to the
current menu, with the ability to duplicate the function of the three menu knobs.
This function only applies to selected installation and operational menus that
display the three “ Positioner Icons ” in the right-hand Scroll Area . (Typically, two
or three icons are shown, depending upon the current menu function).
When you select a menu that includes the Positioner Icons , the MENU button
automatically lights. Thus, when the Positioner Icons appear on a menu, you can
adjust the selected function or parameter either with the scroll knobs or with the
Positioner — for your convenience. When you turn the MENU button off, the
Positioner once again is assigned to the current panel function and location.
Border Menu — with Positioner Icons
A) When the left-right Positioner Icon is displayed, you can use the top knob to adjust
the selected function or you can move the Positioner left and right .
B) When the up-down Positioner Icon is displayed, you can use the middle knob to
adjust the selected function or you can move the Positioner up and down .
Left / Right
(X-Axis) Movement:
Horizontal Position Control
Up / Down
(Y-Axis) Movement:
Vertical Position Control
Clockwise /
Counter-clockwise
(Z-Axis) Movement:
Size Control