Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 207 / 332

Synergy Series Operation Guide (v18) Keying • 7–33
5. If the
FLY KEY
button lights up, press it once to disable the Fly Key mode. The Preset
Pattern Key Setup Menu is displayed on the display.
Preset Pattern Key Setup Menu
In the menu’s main area, the menu lists the two individual Key Fill and Key Alpha
sources, plus the location of the selected keyer. Note that if you are using Key 1 , Wipe
Gen 1 will be selected automatically. If you are using Key 2 , Wipe Gen 2 will be
selected automatically.
6. In the Pattern Control Group , select the desired wipe pattern.
7. In the Pattern Control Group , adjust wipe parameters such as
ASPECT
,
BORDER
,
SOFT
,
ROTATION
,
NORM
and
REV
.
8. Adjust the key’s clip and gain in one of two places:
• Use the top
CLIP
knob in the Effects Control Group to adjust clip level.
• Use the middle
GAIN
knob in the Effects Control Group to adjust gain.
9. If desired, you can toggle the
Key Over
button between
On
and
Off
to change the
priority of the two keyers:
•
On
— Select
On
to change the priority to Key 1 , setting it over (visually on top of)
Key 2 . The
KEY OVER
button in the MLE Key 1 Group will now be lit.
•
Off
— Select
Off
to keep the priority as Key 2 over Key 1 . This is the default
setting.
10. Select and adjust additional key modifiers as desired, using the controls in Key
Modifier Sections 1 and 2 . Modifiers include KEY INV , MASK , FLY KEY (see
important note below), POSITIONER , and Border Effects.
The MATTE FILL function is not available for Preset Pattern keys. Refer to the section
“ Using Key Modifiers ” on page 7–49 for details.
Note For convenience when adjusting preset patterns, the SOFT knob in the
Pattern Control Group duplicates the function of the GAIN knob in
the Effects Control Group .
Important The FLY KEY function can be regarded as a modifier, but it is
important to note that it creates a different type of key when used in
conjunction with preset patterns. When FLY KEY is enabled, the
system creates a bordered box around the selected pattern — which
can then be manipulated in 2D space. Special Fly Key modifiers are
enabled (such as size, position, mirror, and crop), but Preset Pattern
modifiers (clip, gain, aspect, border, and soft) are disabled. Refer to the
section “
Flying Keys in 2D ” on page 7–51 for additional information.