Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 190 / 332

7–16 • Keying Synergy Series Operation Guide (v18)
Synergy 4 Control Panel
The following figure illustrates the Effects Control group for the Synergy 4 panel:
Descriptions of each section, button and knob in the Effects Control group are discussed below. The
differences between switcher panels are noted as well.
1. Effects Control Assignment Section
The Effects Control Assignment Section provides a group of buttons that allow you to
assign the Effects Control group to individual MLEs. Buttons are selected
automatically or they can be selected manually.
• (Synergy 2) Press
KEY 1
to assign the group to control keys, borders, and masks in
MLE 1 ’s Key 1 group. The button lights automatically if any button is pressed in
MLE 1 ’s Key 1 group.
• (Synergy 2) Press
KEY 2
to assign the group to control keys, borders, and masks in
MLE 1 ’s Key 2 group. The button lights automatically if any button is pressed in
MLE 1 ’s Key 2 group.
• (Synergy 3 and 4) Press MLE 1 KEY 1 to assign the group to control keys, borders,
and masks in MLE 1 ’s Key 1 group. The button will also light automatically if any
button is pressed in MLE 1 ’s Key 1 group.
• (Synergy 3 and 4) Press
MLE 1 KEY 2
to assign the group to control keys, borders,
and masks in MLE 1 ’s Key 2 group. The button will also light automatically if any
button is pressed in MLE 1 ’s Key 2 group.
1) Effects Control Assignment Section
2) Mask Section 3) Border Control Section
4) Key Control Section 5) Chroma Key Section
EFFECTS CONTROL
2
1
5
3
4
INVERT FORCE
TOP
BOTTOM
LEFT RIGHT
WIDTH GLOW DENSITY
MASK
BORDER
REJECT HUE SUPPRESS
CHROMA KEY
CLIP GAIN
KEY
MLE 1
KEY 1 MLE 2
KEY 1 MLE 3
KEY 1 MLE 4
KEY 1
MLE 1
KEY 2 MLE 2
KEY 2 MLE 3
KEY 2 MLE 4
KEY 2
KEY1
KEY2
MLE1
KEY1
MLE1
KEY2