Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 171 / 332

Synergy Series Operation Guide (v18) Pattern Control • 6–21
• As desired, press
RGB
to use an RGB (Red, Green, Blue) graphic display. Press
HSL
to use an HSL (Hue, Saturation, Luminance) graphic display.
• Use the three knobs to adjust the first wash color’s
Luminance
,
Saturation
and
Hue
, (or
Red
,
Green
and
Blue
components) respectively. You can also adjust the
wash color in each switcher’s Matte Group , using the dedicated
HUE
,
SAT
and
LUM
knobs. Both sets of controls work simultaneously.
8. On the menu, press
Edit Color 2
to choose the second wash color. The Wash Color 2
Menu is displayed (which is identical to the Wash Color 1 Menu ). Repeat step 5 for the
second wash color.
9. Press
Size
to display the Wash Size Menu .
Wash Size Menu
10. Use the
Horizontal
and
Vertical
knobs to adjust the horizontal and vertical size of the
selected wash pattern. These controls vary the pattern’s frequency .
11. Press
Location
to display the Wash Location Menu .
Wash Location Menu
12. Use the Horizontal and Vertical knobs to adjust the horizontal and vertical location of
the selected wash pattern. These controls vary the pattern’s offset .
13. Press Clip to display the Wash Clip Menu .
Note If MATTE LIMIT is selected as ON in the Personality Menu of the
Setup function, RGB will not be shown in the Wash Color Menu and
all color adjustments will be within the RGB color space. However,
colors can be adjusted outside of the RGB color space by setting the
MATTE LIMIT to OFF . The system default is OFF .
Note On the Wash Color 2 Menu , the softkey label changes to Edit Color
1 . Otherwise, all controls are identical — however, you are not able to
adjust Wash Color 2 using the knobs in the Matte Group .