Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 162 / 332

6–12 • Pattern Control Synergy Series Operation Guide (v18)
User Wipe Menu
2. Select the User Wipe button that you wish to program. Two methods are available:
• In the Pattern Control Group , press one of the eight User Wipe buttons (
USER 1
through
USER 8
). Note that the Synergy 2 only has seven User Wipe buttons.
• On the User Wipe Menu , use the top
Knob
to select the desired User Wipe button.
3. Use the middle knob to select one of four categories of User Wipes: Classic , Rotary ,
Matrix , and Special .
4. Use the bottom knob to select the desired wipe within the category. This action
automatically assigns the wipe to the selected User Wipe button, and stores your
selection in on-line memory.
5. Repeat for all additional User Wipe buttons that you wish to program.
This completes the procedure to select a User Wipe . To use the wipe in production, select a User
Wipe button as you would any of the other wipes in the Pattern Selection Section .
Classic Wipes
The following figure illustrates the available “Classic” User Wipes. The numbers under the wipe
patterns indicate the
wipe number as selected using the bottom knob in the scroll area of the User
Wipe Menu .
Classic Wipes – Visual Representations and Wipe Numbers
Operating
Tip
To view the wipe, select Black and Color Background in the active
MLE, and place the fader halfway through the transition.
Note The graphical representations of the wipes do not correspond with the
patterns on the actual keys in the Pattern Control Group.
1 2 3 4 5 6 7 8 9 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24