Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 157 / 332

Synergy Series Operation Guide (v18) Pattern Control • 6–7
• The
ROTATION
knob allows you to rotate patterns (when the
ROT
button is lit).
~ Turning the knob clockwise rotates the selected pattern clockwise.
~ Turning the knob counter-clockwise rotates the selected pattern
counter-clockwise.
As an overall reminder about the knobs in the Pattern Control group, please note the following
important point regarding end-stop knobs:
• Because an End-stop Knob ’s electrical position can be overwritten by recalling a
memory register (or by assigning the Pattern Control group to another MLE), the
electrical knob position may not match the knob’s current physical position. In this case,
the knob can be adjusted but you may not have the full adjustment range available.
Operating
Tip
To fully re-synchronize an End-stop Knob ’s physical-to-electrical
position, turn the knob fully clockwise, then fully counter-clockwise.
Full-range adjustments can now be made.
ROTATION