Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 123 / 332

Synergy Series Operation Guide (v18) Switcher Basics • 4–45
6. To modify the position of the Time Clock display and the size of the digits:
• Access the Time Clock Main Menu as previously described.
• Press Position to display the TimeClock Position Menu .
TimeClock Position Menu
• Use the X knob to adjust the horizontal position of the clock. You can also move the
Positioner left and right .
• Use the Y knob to adjust the vertical position of the clock. You can also move the
Positioner up and down .
• Use the Size knob to adjust the size of the clock. You can also rotate the Positioner
clockwise and counter-clockwise . Choose the size of the digits to be one of the
following:
~
Normal
~ Double
~ Triple
7. Press Done to accept the new position and store it in “personality” memory.
This completes the procedure to modify the parameters of the Time Clock .
Preview Mask
The Preview Mask overlay places a thin “marquee-style” outline on the main preview
output — around any active box mask. This function makes it easy to identify various
masks, particularly when one may be placed near the edge of the screen.
Note a. For auto transitions such as wipes and dissolves, the clock will
not reset and start until the
end of the transition.
b. For transitions performed with the Fader , the clock will not reset
and start until the Fader reaches a limit.
c. In the count-down mode, when the clock reaches zero, it stops
and does not automatically wrap to the preset time.
Operation
Tip
You can also press HOME , PREVIEW OVERLAY (to display the
Preview Overlay Menu ), then Time Clock (to display the Time
Clock Menu ).
MASK
PV