Ross SYNERGY 4000DR-003, Руководство по эксплуатации, Страница: 102 / 332

4–24 • Switcher Basics Synergy Series Operation Guide (v18)
2. Press the desired crosspoint.
3. Release both buttons.
The
SHIFT
button plus the selected source both stay lit, as indicated in the following example:
Shifted Crosspoint Selected on PGM
Please note:
• With a shifted source selected on a bus row, to take an unshifted source, simply press its
button.
• With a shifted source selected, to take another shifted source, repeat the procedure
above.
• If you press SHIFT and then decide not to select a source, simply release the SHIFT
button. No change will occur on the bus.
PGM/Key SHIFT Mode
A special mode called PGM/Key SHIFT can be activated during switcher set up. Although primarily
designed for the Synergy 2 (with only 17 buttons per bus), activating the
PGM/Key SHIFT
mode
makes each MLE’s Key Bus shifted all the time (as its default state).
This effectively acts as a shift lock, giving you one-button access to the higher-numbered inputs on
each
Key Bus (without having to press
SHIFT
each time to reach them).
If the
PGM/Key SHIFT
mode has been implemented, you may notice that the crosspoint labels on
each KEY bus will be different from each MLE’s BKGD and PST bus labels.
Please consult with your facility’s engineer to determine if the
PGM/Key SHIFT
mode is
implemented. Refer to the section, “ PGM/Key Shift Crosspoint Buses ” in the Synergy Series
Installation Guide for more information.
Bus Hold Mode
The Bus Hold button allows you to retain the currently selected video crosspoint on a bus during a
memory recall. If the Bus Hold button is assigned to a crosspoint, each bus BKGD (or PGM), PST,
Key 1, and Key 2, on all MLEs, can be held independently. Refer to the section, “ Setting Up Panel
Buttons ” in the Synergy Series Installation Guide for setup details.
If the Bus Hold Clear function has been enabled in the Personality Menus , you can turn off all the
Bus Holds by performing a soft reset (by pressing ALL + ALL ). Refer to the section “ Bus Hold Clear ”
in the Synergy Series Installation Guide for setup details.
SHIFT BLACK
PGM
PST
CAM
1
CAM
2
CAM
3
CAM
4
CAM
1
COLOR
BKGD 1
COLOR
BKGD 2
SHIFT
MLE
1
MLE
1
MLE
2
MLE
2
MLE
3
MLE
3
BLACK
CAM
1
CAM
2
CAM
3
CAM
4
CAM
1
COLOR
BKGD 1
COLOR
BKGD 2
ON
ON
N/S
N/S