Ross Synergy 2 SD, Руководство по установке

Страница: 74 / 414

2–30 • Installation Synergy Series Installation Guide (v18)
Installation Change Confirmation Menu
11. JP11, Software Upgrade
Jumper JP11 controls the ability to upgrade software from a storage device:
• Up : Software can be upgraded from a storage device. Refer to the section
“ Software Upgrade ” on page 2–34 for instructions.
• Down : Software cannot be upgraded from a storage device. This is the default
position.
System Reset Notes
Please note the following important points regarding the system reset function:
• Turning power on and off in either the control panel or the frame causes that device to
reset — but not the other device. This feature ensures that the program video will not be
adversely affected if the control panel loses power.
• If the frame only is turned off, the panel indicates a frame power failure on the
POWER
FAIL
indicator LEDs. In addition, the control panel menu displays the Splash Screen.
~ On a Synergy 4 switcher, when frame power is restored, the power failure status
indicator clears, and the panel returns to the main menu with all control panel
settings in the “reset” state — even though the panel was not physically reset.
~ On Synergy 2 and Synergy 3 switchers, when frame power is restored, the power
failure status indicator clears, and the panel returns to the main menu with all
control panel settings in the state they were in before the frame power fail occurred
— even though the panel was not physically reset.
Note The rack frame stores all installation, personality, custom control
macros, memories, and the current video state. The control panel keeps
track of the current menu and the settings of all buttons. Resetting the
frame changes the current video state. Turning the control panel on and
off will
not reset the video state, because a frame reset has not been
initiated.