Ross Synergy 2 SD, Руководство по установке

Страница: 233 / 414

Synergy Series Installation Guide (v18) Additional Installation Setups • 9–3
Aux Bus Setup
The Aux Bus Menu 1-2 allows you to set up Aux (Auxiliary) panels, and assign certain “rights” to
those panels. The setups procedures cover both local and remote Aux panels.
• The “ Local ” Aux panel consists of the Aux Bus (on the Switcher control panel), plus the
Aux Bus Assign Group of the switcher, as displayed in the following figure (on the
Synergy 4):
Synergy 4 Aux Bus and Aux Bus Assign Group
• The “ Remote ” Aux panels consist of two different types of panels. A Dedicated
Remote Aux Panel controls one Aux Bus output, as shown below (for the Synergy 4):
Synergy 4 Dedicated Remote Aux Panel
An Assignable Remote Aux Panel controls all 12 Aux Bus outputs, as shown below
(for the Synergy 4):
Synergy 4 Assignable Remote Aux Panel
Note
The following setup procedures include information for the new
versions of the Dedicated and Assignable Remote Aux Panels. These
panels include a feature that allows the manual override of the Aux
panel selection via a GPI trigger.
DVE
SEND
MLE
1
MLE
2
MLE
3
CLEAN
FEED
PGM
ON
BLACK
CAM
1
CAM
2
CAM
3
CAM
4
CAM
5
CAM
6
VTR
1
VTR
2
VTR
3
VTR
4
DDR
1
DDR
2
DVE
1
DVE
2
CG
1
CG
2
ASSIGN
1
ASSIGN
2
ASSIGN
3
ASSIGN
4
ASSIGN
5
ASSIGN
6
ASSIGN
7
ASSIGN
8
ASSIGN
9
ASSIGN
10
ASSIGN
11
ASSIGN
12
N/S
AUX BUS ASSIGN
BLCK
MLE 1 MLE 2 MLE 3 PGM
KEY
AUTO
BKGD
AUTO BOTH
AUTO
PGM PV KEY SHFT
BLCK
MLE 1 MLE 2 MLE 3 PGM
AUX
1
AUX
2
AUX
3
AUX
4
AUX
5
AUX
6
AUX
7
AUX
8
SHFT