Ross Synergy 100 MD, Руководство оператора

Страница: 98 / 402

6–4 • Pattern and Effects Control Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Wipes
The Effects Control Groups also include two pattern generators:
• Pattern Generator 1 is shared by the Wipe Generator and the Preset Pattern
Generator for KEY1 of the Effects Keyers . This pattern generator is full-featured —
all wipe patterns are available.
• Pattern Generator 2 is used by the Preset Pattern Generator for KEY2 of the Effects
Keyers . This generator is restricted to the Classic wipe patterns, minus the circle, and
the Rotary wipe patterns. Matrix wipes are not available.
The top Effects Control Group includes 10 buttons which display 10 “classic” wipes. In addition,
each button provides access to any of the more than 60 “user” wipes available.
To select a wipe, press WIPE in the Transition Control Group and select the desired pattern button.
Once selected, the pattern can be modified and used on air. A single press of a button will illuminate
its LED, and select the wipe as pictured. If you double-press the button, the LED will flash, indicating
“user wipe mode”, and you will be able to choose any of the more than sixty wipes available.
Also included in the top Effects Control Group are the following two buttons:
• The REV/LEARN button controls the direction of the wipe. Three choices of wipe
directions are available:
~ The default state of the REV/LEARN button is off. The wipe will proceed in the
normal fashion, with the new picture being revealed from the black area (as shown
on the pattern button) to the white area. The button’s LED will not be lit.
~ Press REV/LEARN to set the direction of the wipe to reverse. The new picture is
revealed from the white area to the black area. The button’s LED will be on.
~ Double-press REV/LEARN to set the direction of the wipe to “flip-flop”. Wipe
direction is normal for the first transition, reverse for the second, then normal for the
third, etc. The button’s LED will be flashing.
• The CNTR/EFF D button is used to return borders, wipe positions, masks, and cropping
features to their default state or position. In addition, it is used to default flying keys,
including
Squeeze & Tease boxes, to full screen. When recalling memories, this button
enables you to perform an “effects dissolve” between two switcher setups.
Note
The Star and Heart patterns and the Matrix Wipes are currently not
implemented.
Note
Because Pattern Generator 1 is shared, you cannot select a
WIPE
transition if
PST PATT
is selected on Keyer 1 . Similarly, if
WIPE
is
enabled and you select a
PST PATT
key type in Keyer 1 , the
WIPE
button turns off and the transition type reverts to
DISS
.
REV
L
E
A
R
N
CNTR
E
F
F
D