Ross Synergy 100 MD, Руководство оператора

Страница: 84 / 402

5–4 • Transitions Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
• The
WIPE
button selects a wipe as the transition type. When a wipe is performed,
the video signal on the PST bus gradually replaces the video signal on the PGM bus
using a wipe pattern chosen from the Effects Control Group . At the end of the
transition the PST video signal completely replaces PGM video signal and the
buses flip-flop.
The
WIPE
button is mutually exclusive with the
DISS
and
DVE
buttons. Refer to
the section “ Using Wipes ” on page 6–6 for more information.
• The
DVE
button assigns the next transition to the primary DVE.
7. Next Transition Section
The Next Transition Section includes three buttons that allow you to select the
combination of buses that will be included in the next transition .
• The
BKGD
button tells the switcher to include a PGM / PST transition during the
next transition. The source selected on the PST bus will be selected on the PGM
bus and taken on-air. Similarly, the source selected on the PGM bus will be selected
on the PST bus and taken off-air.
• The
KEY1
button tells the switcher to include Key 1 during the next transition as
follows:
~
If the Key 1 is currently off-air , the next transition will take Key 1 on-air.
~ If the Key 1 is currently on-air , the next transition will take Key 1 off-air.
• The
KEY2
button tells the switcher to include Key 2 during the next transition as
follows:
~
If the Key 2 is currently off-air , the next transition will take Key 2 on-air.
~ If the Key 2 is currently on-air , the next transition will take Key 2 off-air.
Refer to the section below for more information on performing a transition.
Operating
Tip
To take more than one bus to air during a transition, simultaneously
press the associated buttons. For example, to take the Background bus
and Key 2 bus, simultaneously press the
BKGD and KEY2 buttons.
WIPE
DVE
BKGD
KEY1
KEY2