Ross Synergy 100 MD, Руководство оператора

Страница: 38 / 402

1–20 • Introduction Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Control Panel Redundant Power
This provides a spare “quick swap” power supply for the Synergy 100 MD control panel. The control
panel power supply consists of a custom external “brick” which includes a locking connector. It can
be easily changed in a few seconds.
Frame Redundant Power
This option provides redundant power for those who have replaced or upgraded their frame and
already have redundant power for their panel.
Spare Parts Kit
A Spare Parts Kit is available which provides switcher parts according to the following criteria:
• the part comes into frequent contact with the user
• the part can be easily damaged or may wear out with excessive use
• the part can be damaged by connecting excessive voltage to an external connector
• the part is used in system power management
• the part can be lost easily
Custom Cable for Main Control Panel
The Control Panel cable connects the control panel to the electronics frame. It is a shielded 8-pin
RJ-45, CAT5 cable. The control panel and frame can be separated by a maximum of 300 meters.
A 10 meter control panel cable is supplied as standard with the switcher. If cable lengths other than 10
meters are needed, a custom cable can be ordered (by the meter).