Ross Synergy 100 MD, Руководство оператора

Страница: 322 / 402

18–6
•
Lighting Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Auto Follow
The Auto Follow feature allows you to set how you want the light to move with the image when you
are using a sequence or wipe.
Use the following procedure to enable the Auto Follow feature:
1. Navigate to the Lighting Menu as follows:
• Press
FLY KEY
in the Effects Keyers Group .
• Press
SEL/DVE
+
Light
to display the Lighting Menu .
2. Press
3. Auto Follow
to display the Auto Follow Menu .
Auto Follow — Lighting Menu
3. Set the
Auto Follow
option by toggling
3. Auto Follow
to one of the following:
•
On
— Use this option to have the light source keep its relative position, based on
the center of the key. This helps to keep the lighting constant when moving an
image in a sequence or wipe. If the image rotates, however, you will see the light
move as the plane is rotated.
• Off — Use this option to have the light source keeps to the position coordinates you
have defined, regardless of the location of the image.
This completes the procedure to enable the Auto Follow feature.
Luminance Clipping
Minimum brightness is represented by 0.0% and 100.0% represents maximum brightness. For
example, if you set the light to a high intensity, this may produce some washout on screen.
Luminance Clipping
In this instance, you would clip the maximum light to a lower level. If the image appears too dark,
adjust the minimum light level to a higher setting.
Use positioner or Hue, Sat, Lum to modify
Lighting Key 1
Natural
On
12
0. Lighting Setup
1. Position
2. Presets
3. Auto Follow
4. Luminance Clipping