Ross Synergy 100 MD, Руководство оператора

Страница: 314 / 402

17–38 • Squeeze & Tease MD Sequences and Wipes Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
4. Select a setup, or location, of the files as follows:
• Press
1. Set Names
.
• Use the
ª
and
©
buttons to select the Setup you want to use.
5. Press
BACK
to display the Disk Menu .
6. Press
2. Recall
to display the Recall Menu .
Recall Menu
7. Press 4. Recall 3D Wipes .
8. Confirm recalling the 3D Wipes to a storage device as follows:
• Press 0. Yes to recall the 3D Wipes.
• Press
1. No
to exit the menus, without recalling the 3D Wipes.
This completes the procedure to recall an entire set of 3D Wipes.
Recalling a Specific Squeeze & Tease Wipe
Use the following procedure to recall a specific Squeeze & Tease Wipe:
1. Navigate to the Dest/Source Menu as follows:
• Press MENU to display the Main Menu .
• Press 5. Disk to display the Disk Menu .
• Press 0. Dest/Source to display the Dest/Source Menu .
Dest/Source Menu
100
Previous 10
Down SEL
Accept 1
Up
Recall
0. Reserved
1. Recall Memories
2. Recall Personality
3. Recall Installation
*4. Recall 3D Wipes 5. Recall Indiv 3D Wipe
6. Recall Bus Map
Hard Drive: SETUP(00)
*indicates the file is present on disk
MENU
Exit 100
Previous 10
Down SEL
Accept 1
Up
Dest/Source
0. Dest/Source
1. Set Names Hard Drive
SETUP(00)