Ross Synergy 100 MD, Руководство оператора

Страница: 298 / 402

17–22 • Squeeze & Tease MD Sequences and Wipes Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
Deleting a Sequence
Use the following procedure to delete a sequence:
1. Navigate to the Load/Save Seq. Menu . Refer to the section “ Loading a Sequence ” on
page 17–20 for details.
2. From the Load/Save Seq. Menu , press
2. Delete Sequence
to display a confirmation
message.
3. When prompted with the message:
• Press
0. Confirm
to continue with the deletion.
• Press
1. Cancel
to terminate the deletion.
This completes the procedure to delete a sequences.
Previewing a Sequence
You can review the sequence on your preview monitor before you bring it to air.
Use the following procedure to preview your sequence before you bring it to air:
1. Fly the Key with the sequence loaded and select it in the next Transition area of your
switcher.
2. Press the DISS , WIPE and DVE SEND buttons at the same time to display the
Runtime Menu .
3. Run the sequence on the preview monitor using the Auto Trans button or the Fader .
This completes the procedure to preview your sequence before you bring it to air.
Sequence Memory Notes
Please note the following important points regarding saving and loading sequences:
• The switcher enables you to store up to 100 sequences.
• You can store up to 800 Keyframes in total.
• Each sequence can have up to 25 Keyframes.